Please insert at least 3 characters

TRUM – Section 6

Reporting of electricity transportation contracts

The reporting of electricity transportation contracts to ACER between two balancing zones within the European Union will be mandatory from 7 April 2016 onwards. In this Chapter, the Agency provides information on how the data fields listed in Table 3 of the Annex to the Implementing Acts should be populated. In subsequent editions of the TRUM, the Agency may also provide further guidance on how to report electricity transportation contracts. It should be noted that Table 3 of the Annex to the Implementing Acts shall be used for the reporting of both standard and non-standard electricity transportation contracts.

It is worth noting that not all the data fields are mandatory for all transactions. Data fields are expected to be populated when applicable according to this manual. The Agency has prepared a list of trading scenarios to show what is expected and applicable to each scenario. The trading scenarios are listed in ANNEX III.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.1

Data fields related to common data for total primary allocation results and secondary market resale and transfer rights and bid document

This section includes the following fields:

1. Document identification
2. Document version
3. Document type
4. Sender identification
5. Sender role
6. Receiver identification
7. Receiver role
8. Creation date and time
9. Bid time interval/applicable time interval
10. Domain
11. Document status (if applicable)

 

Data Field No (1) Document identification

No. Field Identifier Description
1 Document identification Unique identification of the document for which the time series data is being supplied.

 

Description of Accepted Values Type Length Examples
Sender Unique Identification String Maximum 35 A_R-IT-FR-I-HOURLY1624-140709-01

 

This field identifies the unique identification of the document for which the time series data is being supplied. A Bid Document for a given set of time series and a given bid period must have a unique identification assigned by the sender of the document for all transmissions to the receiver. All additions, modifications, or suppressions for the time series and bid period must use the same identification.

This field is mandatory.

 

Data Field No (2) Document version

No. Field Identifier Description
2 Document version Version of the document being sent. A document may be sent several times, each transmission being identified by a different version number that starts at 1 and increases sequentially.

 

Description of Accepted Values Type Length Examples
An integer value starting with 1.
1
2
3

999
Integer Maximum 3 1

 

This field identifies the document version. The document version is used to identify a given version of a time series set for a given bid period. The first version number for a given document identification shall normally be 1. The document version number must be incremented for each retransmission of a document that contains changes to the previous version. The receiving system shall only accept a document with a version number which is greater than the previous version number of the same document.

This field is mandatory.

 

Data Field No (3) Document type

No. Field Identifier Description
3 Document type The coded type of the document being sent.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes.
A24: Bid Document
Alphanumeric 3 (no blanks) A24

 

This field identifies the document type. The document type identifies the information flow characteristics. The initial code to be used is: A24: Bid Document.

 

Data Field No (4) Sender identification

No. Field Identifier Description
4 Sender identification Identification of the party that is the owner of the document and is responsible for its content (EIC code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric Maximum 16 10X1001A1001A450

 

This field indicates the identification of the owner and sender of the document. The sender of the document is identified by a unique coded identification. This code identifies the party that is the “owner” of the information being transmitted in the document and who is responsible for its content.

It should be borne in mind that for the reporting of transportation contracts, the Agency had to rely on existing industry schemas which were originally defined for different purposes and therefore have to be understood in a way that they comply with the REMIT transaction reporting regime. For its original purpose, the field and its values assume that the sender is normally a TSO or another market participant.

However, for the purpose of reporting under REMIT, the sender may not only be a self-reporting market participant, but also a third-party RRM. When the reporting entity is a third-party RRM, the third-party RRM has certain responsibilities for the document content as they have to validate the data they receive from market participants, ensure completeness, accuracy and timely submission of the data according to Article 11(2) of Commission Implementing Regulation (EU) No 1348/2014 and, if necessary, correct and resubmit the rejected data in line with Article 11(2) of Commission Implementing Regulation (EU) No 1348/2014. This is why the sender identification has to identify the third-party RRM in cases where a third-party RRM reports.

This field is mandatory.

 

Data Field No (5) Sender role

No. Field Identifier Description
5 Sender role Identification of the role that is played by the sender, e.g. TSO or other reporting party.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes.

A07 = Transmission capacity allocator

Alphanumeric Maximum 3 A07

 

This field indicates the role of the sender within the document. The sender role, depending on the operational process which identifies the role of the sender within the document.

This field is mandatory.

 

Data Field No (6) Receiver identification

No. Field Identifier Description
6 Receiver identification Identification of the party who is receiving the document.

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric Maximum 16 10X1001A1001A450

 

This field identifies the party receiving the document. The receiver of the document is identified by a unique coded identification. In general this identifies the auction office or its representative.

The codification scheme used for the coded identification is indicated by the coding scheme attribute. It is a 3 character alphanumeric code.

This field is mandatory.

 

Data Field No (7) Receiver role

No. Field Identifier Description
7 Receiver role Identification of the role played by the receiver.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes.

A32 = Market information aggregator

Alphanumeric 3 A32

 

This field indicates the receiver role, which identifies the role of the receiver of the document.

This field is mandatory.

 

Data Field No (8) Creation date And time

No. Field Identifier Description
8 Creation date And time Date and time of the creation of the document, e.g. when the TSO or other reporting entity sends the transaction to the Agency.

 

Description of Accepted Values Type Length Examples
ISO 8601 date format using UTC time format. Date and Time 30 2014-01-29T10:35:56.00Z

 

This field indicates the date and time that the document was prepared for transmission by the sender.

This field is mandatory.

 

Data Field No (9) Bid time interval

No. Field Identifier Description
9 Bid time interval/applicable time interval The beginning and ending date and time of the period covered by the document.

 

Description of Accepted Values Type Length Examples
ISO 8601 date format using UTC time format. Date and Time 41 2009-03-01T13:00:00Z/2010-05-11T15:30:00Z

 

This field identifies the beginning and ending date and time of the period covered by the document. This information provides the start and end date and time of the bid period. The receiver will discard any time intervals outside the bid period.

This field is mandatory.

 

Data Field No (10) Domain

No. Field Identifier Description
10 Domain The domain covered within the document.

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the domain that is covered in the bid Document. This covers what auction identifications may be used.

 

Data Field No (11) Document status

No. Field Identifier Description
11 Document status (if applicable) Identifies the status of the document.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes.
A01 = Intermediate
A02 = Final
Alphanumeric 3 characters. A02

 

This field is mandatory.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.2

Data fields related to capacity allocation time series (for primary allocation)

This section includes the following fields:

12. Time series identification
13. Bid document identification
14. Bid document version
15. Bid identification
16. Bidding party
17. Auction identification
18. Business type
19. In area
20. Out area
21. Contract type
22. Contract identification
23. Measure unit quantity
24. Currency
25. Measure unit price
26. Curve type
27. Classification category

 

Data Field No (12) Time series identification

No. Field Identifier Description
12 Time series identification An identification that uniquely identifies the time series.

 

Description of Accepted Values Type Length Examples
Time series Unique Identification Alphanumeric Maximum 35 TotalAllocationResults_TS_2099333
or 1432_137_42_40_559

 

This field identifies the time series. This must be a unique number that is assigned by the auction office for each time series in the document.

This field is mandatory.

 

Data Field No (13) Bid document identification

No. Field Identifier Description
13 Bid document identification The identification of the document in which the bids or resale references are contained.

 

Description of Accepted Values Type Length Examples
Unique bid document identification Alphanumeric Maximum 35 AA-BB-T-PROUCTXXX-YYMMDD-01
or 1432_11XTEST——–1_42_40

 

This field identifies the document for which the bids referenced are contained. Each bid allocated is contained in the bid document sent by the user.

This field is mandatory.

 

Data Field No (14) Bid document version

No. Field Identifier Description
14 Bid document version Version of the bid document having been sent.

 

Description of Accepted Values Type Length Examples
An integer value starting with 1.
1
2
3

999
Integer Maximum 3 1

 

This field identifies the document version for the bid document.

This field is mandatory.

 

Data Field No (15) Bid identification

No. Field Identifier Description
15 Bid identification The identification of the time series that was used in the original bid. This is the unique number that is assigned by the bidder when they made their original bid or resale. Left blank if not applicable.

 

Description of Accepted Values Type Length Examples
Unique time series document identification Alphanumeric Maximum 35 BID00001

 

This field uniquely identifies the bid. This is the unique number that is assigned by the bidder when he made his original bid.

This field is mandatory.

 

Data Field No (16) Bidding party

No. Field Identifier Description
16 Bidding party Identification of market participant who bid for the capacity or resold capacity (EIC X Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric Maximum 16 10X1001A1001A450

 

This field is mandatory.

 

Data Field No (17) Auction identification

No. Field Identifier Description
17 Auction identification The identification linking the allocation to a set of specifications created by the auction operator.

 

Description of Accepted Values Type Length Examples
Unique Identification that clearly identifies the auction to which the bid is addressed. Alphanumeric Maximum 35 AT-CH-M-BASE——-140801-01

 

This field is mandatory.

 

Data Field No (18) Business type

No. Field Identifier Description
18 Business type Identifies the nature of the time series.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid business Type codes.

A03 = External Trade Explicit Capacity

Alphanumeric 3 A03

 

This field indicates the nature of the time series.

This field is mandatory.

 

Data Field No (19) In area

No. Field Identifier Description
19 In Area The area where the energy is to be delivered (EIC Y Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field provides an identification of the area where the energy is going (10Y code of area where the energy is going). This field is mandatory.

 

Data Field No (20) Out area

No. Field Identifier Description
20 Out Area The area where the energy is coming from (EIC Y Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the area where the energy is coming from (10Y code of area where the energy is coming from).

This field is mandatory.

 

Data Field No (21) Contract type

No. Field Identifier Description
21 Contract Type The contract type defines the conditions under which the capacity was allocated and handled, e.g. daily auction, weekly auction, monthly auction, yearly auction, long term contract, etc.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes
A01 = Daily
A02 = Weekly
A03 = Monthly
A04 = Yearly
Alphanumeric 3 A01

 

This field defines the conditions under which the capacity was allocated and handled. The significance of this type is dependent on the in area and out area specific coded working methods. The Transmission Capacity Allocator responsible for the area in question auctions defines the contract type to be used, e.g.: daily auction, weekly auction, monthly auction, yearly auction, Long term contract, etc.

This field is mandatory.

 

Data Field No (22) Contract identification

No. Field Identifier Description
22 Contract identification The contract identification of the time series instance. This must be a unique number that is assigned by the auction operator and shall be used for all references to the allocation.

 

Description of Accepted Values Type Length Examples
Capacity Agreement Identifications (CAI) Alphanumeric Maximum 35 3105105CY601

 

This field provides an identification that uniquely identified the allocation. This must be a unique number that is assigned by the auction office and shall be used for all references to the allocation.

This field is mandatory for the assigning party if capacity was allocated.

 

Data Field No (23) Measure unit quantity

No. Field Identifier Description
23 Measure unit quantity The unit of measure in which the quantity in the time series is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. Alphanumeric Maximum 3 MWH

 

This field indicates the unit if measurement used for the quantities expressed within the time series.

This information is mandatory.

 

Data Field No (24) Currency

No. Field Identifier Description
24 Currency (if applicable) The currency in which the monetary amount is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. Alphanumeric Maximum 3
ISO 4217
EUR

 

This field indicates the currency used for the monetary amount expressed within the time series.

This information is mandatory if available.

 

Data Field No (25) Measure unit price

No. Field Identifier Description
25 Measure unit price (if applicable) The unit of measure in which the price in the time series is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. Alphanumeric Maximum 3 MWH

 

This field indicates the unit if measurement used for the price expressed within the time series (MW per unit, MWh per unit, etc.).

This information is mandatory.

 

Data Field No (26) Curve type

No. Field Identifier Description
26 Curve type (if applicable) Describes the type of the curve that is being provided for the time series in question, e.g. variable sized block or fixed size block or point).

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes.
A01 – Sequential fixed size blocks
A02 – Points
A03 – Variable sized blocs
A04 – Overlapping brakepoints
A05 – Non-overlapping brakepoints
Alphanumeric Maximum 3 A01

 

This field represents the coded identification of the curve that is described in the Period and Interval class.

If the “Curve Type” element is omitted in the XML instance a default value of “sequential fixed sized blocks” shall be understood. Sequential fixed size blocks (A01) curve is made of successive Intervals of time (Blocks) of constant duration (size), where the size of Blocks is equal to the Resolution of the Period. The value of the Quantity remains constant within each block.

 

Data Field No (27) Classification category

No. Field Identifier Description
27 Classification category (if applicable) The category of the product as defined by the market rules.

 

Description of Accepted Values Type Length Examples
Refer to ENTSO-E Core Component Code list document for valid codes.
The following codes have been initially defined:
A01: Base
A02: Peak
A03: Off-peak
A04: Hourly
Alphanumeric 3 A01

 

This information provides the basic category of the auction and describes what hours of the day are being auctioned.

This information is mandatory.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.3

Data fields related to No-Bid auction time series (for primary allocation)

This section includes the following fields:

28. Identification
29. Auction identification
30. Classification category

 

Data Field No (28) Identification

No. Field Identifier Description
28 Identification The identification of a time series instance.

 

Description of Accepted Values Type Length Examples
Time series Unique Identification Alphanumeric Maximum 35 1432_275_66_43_1207

 

This field provides an identification that uniquely identified the no-bid auction time series. There may be several no-bid auction time series classes for a total allocation results document. Each time series identifies an auction where no market participant bids have been received.

 

Data Field No (29) Auction identification

No. Field Identifier Description
29 Auction identification The identification of the auction where no bids have been received.

 

Description of Accepted Values Type Length Examples
Identification of a no bid auction. Alphanumeric Maximum 35 1432_275_66_44_1805

 

This field provides an identification of the auction where no bids have been received.

 

Data Field No (30) Classification category

No. Field Identifier Description
30 Classification category (if applicable) The category of the product as defined by the market rules.

 

Description of Accepted Values Type Length Examples
Refer to ENTSO-E Core Component Code list document for valid codes.
The following codes have been initially defined:
A01: Base
A02: Peak
A03: Off-peak
A04: Hourly
Alphanumeric 3 A01

 

This field provides the classification category identifying the type of auction that is being held in respect to a given time period.

This field is mandatory if applicable.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.4

Data fields related to secondary rights time series (for secondary rights)

This section includes the following fields:

31. Time series identification
32. Business type
33. In area
34. Out area
35. Rights holder
36. Transferee party
37. Contract identification
38. Contract type
39. Previous contract identification
40. Measure unit quantity
41. Auction identification
42. Currency
43. Measure unit price
44. Curve type

 

Data Field No (31) Time series identification

No. Field Identifier Description
31 Time series identification The identification of the time series instance. This must be a unique number that is assigned by the sender for each time series in the document.

 

Description of Accepted Values Type Length Examples
Time series Unique Identification Alphanumeric Maximum 35 RS123446928
or 1432_137_42_40_559

 

This field provides a unique number that is assigned by the sender for each time series in the document.

This field is mandatory.

 

Data Field No (32) Business type

No. Field Identifier Description
32 Business type Identifies the nature of the time series, e.g. capacity rights, capacity transfer notification, etc.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes.

A57 = Resale pricing

Alphanumeric 3 A57

 

This field indicates the nature of the time series concerning the rights.

This field is mandatory.

 

Data Field No (33) In area

No. Field Identifier Description
33 In area The area where the energy is to be delivered (EIC Y Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the area where the energy is going (10Y code of area where the energy is going).

This field is mandatory.

 

Data Field No (34) Out area

No. Field Identifier Description
34 Out area The area where the energy is coming from (EIC Y Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the area where the energy is coming from (10Y code of area where the energy is coming from).

This field is mandatory.

 

Data Field No (35) Rights holder

No. Field Identifier Description
35 Rights holder Identification of the market participant who is owner of or has the right to use, the transmission rights in question (EIC X Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the Rights Holder by a unique coded identification. Whenever rights are transferred, the Rights Holder is the transferor of the rights.

This field is mandatory.

 

Data Field No (36) Transferee party

No. Field Identifier Description
36 Transferee party (if applicable) Identification of the market participant to whom the rights are being transferred or the interconnection trade responsible designated by the transferor (as designated in the rights holder attribute) to use the rights (EIC X Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric The maximum length of this information is 16 characters 10Y0000123456789

 

This field identifies the Transferee party by a unique coded identification. In certain cases the transferee party also acts as Interconnection Trade Responsible.

This field is mandatory in case of transfers.

 

Data Field No (37) Contract identification

No. Field Identifier Description
37 Contract identification The contract identification of the time series instance. This must be the number that has been assigned by the transmission capacity allocator, e.g. the TSO or auction operator, or allocation platform.

 

Description of Accepted Values Type Length Examples
Capacity Agreement Identifications (CAI) Alphanumeric Maximum 35 3105105CY601

 

This field provides the number that has been assigned by the Transmission Capacity Allocator. This field provides identification that uniquely identifies the allocation.

This field is mandatory.

 

Data Field No (38) Contract type

No. Field Identifier Description
38 Contract type The contract type defines the conditions under which the rights was allocated and handled, e.g. daily auction, weekly auction, monthly auction, yearly auction, etc.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes.
A01 = Daily
A02 = Weekly
A03 = Monthly
A04 = Yearly
Alphanumeric 3 A01

 

This field defines the conditions under which the rights were allocated and handled. The significance of this type is dependent on the in area and out area specific coded working methods.

The Transmission Capacity Allocator responsible for the area in question auctions defines the contract type to be used, e.g.: daily auction, weekly auction, monthly auction, yearly auction, Long term contract, etc.

This field is mandatory.

 

Data Field No (39) Previous contract identification

No. Field Identifier Description
39 Previous contract identification (if applicable) The identification of a previous contract used to identify the transfer rights.

 

Description of Accepted Values Type Length Examples
Capacity Agreement Identifications (CAI) Alphanumeric Maximum 35 3105105CY601

 

This information identifies the previous identification that was used to identify the rights. This is only applicable if there was a change in Contract Identification information.

 

Data Field No (40) Measure unit quantity

No. Field Identifier Description
40 Measure unit quantity The unit of measure that is applied to the quantities in which the time series is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. Alphanumeric Maximum 3 MWH

 

This field indicates the unit if measurement used for the quantities expressed within the time series.

This field is mandatory.

 

Data Field No (41) Auction identification

No. Field Identifier Description
41 Auction identification (if applicable) The identification linking the capacity rights to a set of specifications created by the transmission capacity allocator, e.g. TSO or auction operator, or allocation platform.

 

Description of Accepted Values Type Length Examples
Unique Identification that clearly identifies the auction to which the bid is addressed. Alphanumeric Maximum 35 AT-CH-M-BASE——-140801-01

 

This field provides a unique identification of the set of specifications that clearly defines the auction to which the capacity rights submitted by the Capacity Trader are to be re-auctioned.

 

Data Field No (42) Currency

No. Field Identifier Description
42 Currency (if applicable) The currency in which the monetary amount is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. String Maximum 3
ISO 4217
EUR

 

This field indicates the currency used for the monetary amount expressed within the time series.

This information is mandatory if available.

 

Data Field No (43) Measure unit price

No. Field Identifier Description
43 Measure unit price (if applicable) The unit of measure in which the price in the time series is expressed.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes. Alphanumeric Maximum 3 MWh

 

This field indicates the unit if measurement used for the price expressed within the time series (MW per unit, MWh per unit, etc.).

This information is mandatory.

 

Data Field No (44) Curve type

No. Field Identifier Description
44 Curve type (if applicable) Describes the type of the curve that is being provided for the time series in question, e.g. variable sized block or fixed sized block or point.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes.
A01 – Sequential fixed size blocks
A02 – Points
A03 – Variable sized blocs
A04 – Overlapping breakpoints
A05 – Non-overlapping breakpoints
Alphanumeric Maximum 3 A01

 

This field represents the coded identification of the curve that is described in the Period and Interval class.

If the “Curve Type” element is omitted in the XML instance a default value of “sequential fixed sized blocks” shall be understood. Sequential fixed size blocks (A01) curve is made of successive Intervals of time (Blocks) of constant duration (size), where the size of Blocks is equal to the Resolution of the Period. The value of the Quantity remains constant within each block.

This information is mandatory if available.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.5

Data fields related to period for primary allocation and secondary processes

This section includes the following fields:

45. Time interval
46. Resolution

 

Data Field No (45) Time interval

No. Field Identifier Description
45 Time interval This information provides the date and time of the start and end of the reported period.

 

Description of Accepted Values Type Length Examples
ISO 8601 date format using UTC time format. Date and Time 41 2009-03-01T13:00:00Z/2010-05-11T15:30:00Z

 

This field identifies the start and end date and time of the time interval of the period in question. The time of the start and end of the period is expressed in UTC.

There may be several period classes for a time series. The overall time interval covered by the period shall be within the complete rights time interval. The number of periods within a time series as characterised by the resolution must completely cover the period’s time interval. If a time series is suppressed then the interval quantities are all zeroed out.

This field is mandatory.

 

Data Field No (46) Resolution

No. Field Identifier Description
46 Resolution The resolution defining the number of periods that the time interval is divided (ISO 8601).

 

Description of Accepted Values Type Length Examples
The resolution is expressed in compliance with ISO 8601.
For example PT15M expresses a 15 minute resolution.
Date and Time PnYnMnDTnHnMnS PT15M

 

This field identifies the number of periods that the time interval is divided. Where nY expresses a number of years, nM a number of months, nD a number of days. The letter “T” separates the date expression from the time expression and after it nH identifies a number of hours, nM a number of minutes and nS a number of seconds.

This information defines the resolution of a single period. The time interval must contain a whole number of periods as expressed by the resolution.

This field is mandatory.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.6

Data fields related to interval for primary and secondary allocation processes

This section includes the following fields:

47. Position
48. Quantity
49. Price amount
50. Bid quantity
51. Bid price amount

 

Data Field No (47) Position

No. Field Identifier Description
47 Position The relative position of a period within an interval.

 

Description of Accepted Values Type Length Examples
The relative position must be expressed as a numeric integer value beginning with 1. All leading zeros must be suppressed. The maximum number of characters is 6.
1
2
3

999999
Integer Maximum 6 1

 

This information provides the relative position of a period within an interval.

This field is mandatory if available.

 

Data Field No (48) Quantity

No. Field Identifier Description
48 Quantity The quantity that has been allocated in the primary auction. The quantity that has been assigned to the nomination party for secondary rights.

 

Description of Accepted Values Type Length Examples
The maximum length of this information is 17 numeric characters (decimal mark included). The number of decimal places identifying the fractional part of the quantity depends on local market rules. Numeric Maximum 17 10.8

 

This information defines the quantity that has been assigned to the nomination party for the interval in question and that is expressed in the Measurement Unit. A decimal point value may be used to express values that are inferior to the defined unit of measurement. The decimal mark that separates the digits forming the integral part of a number from those forming the fractional part. (ISO 6093) shall always be a period (“.”). All quantities are non-signed values.

 

Data Field No (49) Price amount

No. Field Identifier Description
49 Price amount (if applicable) The price expressed for each unit of quantity allocated through the primary allocation. The price expressed for each unit of quantity resold or transferred on the secondary market if applicable.

 

Description of Accepted Values Type Length Examples
The maximum length of this information is 17 numeric characters (decimal mark and sign, if used included). Numeric

ISO 6093

17 1.8

 

This field indicates the price expressed for each unit. The price indicated in a resale document equal to or above which the quantity may be sold.

This information defines the price expressed in the unit of measurement of Price per unit of quantity in compliance with the pricing scheme based on local market rules. The decimal mark that separates the digits forming the integral part of a number from those forming the fractional part (ISO 6093) shall always be a period (“.”).

This field is mandatory if available.

 

Data Field No (50) Bid quantity

No. Field Identifier Description
50 Bid quantity (if applicable) The quantity that was in the original bid document.

 

Description of Accepted Values Type Length Examples
The maximum length of this information is 17 numeric characters (decimal mark included). Numeric

ISO 6093

17 1.8

 

This information defines the quantity that was requested for the interval in question and that is expressed in the Measurement Unit Quantity. A decimal point value may be used to express values that are inferior to the defined unit of measurement. The decimal mark that separates the digits forming the integral part of a number from those forming the fractional part. (ISO 6093) shall always be a period (“.”).All quantities are non-signed values. The number of decimal places identifying the fractional part of the quantity depends on local market rules.

This field is mandatory if available.

 

Data Field No (51) Bid price amount

No. Field Identifier Description
51 Bid Price Amount (if applicable) The original price expressed in the original bid for each unit of quantity requested.

 

Description of Accepted Values Type Length Examples
The maximum length of this information is 17 numeric characters (decimal mark included). Numeric

ISO 6093

17 1.8

 

This information reproduces the price expressed in the unit of measurement of Price per unit of quantity requested in the original bid. The decimal mark that separates the digits forming the integral part of a number from those forming the fractional part (ISO 6093) shall always be a period (“.”).

This field is mandatory if available.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.7

Data fields related to reason for primary allocation and secondary processes

This section includes the following fields:

52. Reason code
53. Reason text

 

Data Field No (52) Reason code

No. Field Identifier Description
52 Reason code (if applicable) A code providing the status of the allocation or the rights.

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for valid codes.
A75: Rights status information
A71: Linked bid rejected due to associated bid unsuccessful
A72: Original bid divided to permit acceptance
A73: Bid accepted
A74: Auction Status
Alphanumeric Maximum 3 A75

 

This field provides the reason code provides the status of the rights identified. As many reason elements as necessary may be used. This information is at the time series level to provide related explanatory information.

This field is mandatory if available.

 

Data Field No (53) Reason text

No. Field Identifier Description
53 Reason text (if applicable) Textual explanation of the reason code.

 

Description of Accepted Values Type Length Examples
If the code does not provide all the information to clearly identify the justification of the allocation then the textual information may be provided. Alphanumeric Maximum 512

 

Used only if the reason code is insufficient to identify an error.

This field is mandatory if available.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.8

Data fields related to Bid header document and bid document fields for organised market places (applicable for secondary trading)

This section includes the following fields:

54. Subject party
55. Subject role
56. Divisible
57. Linked bids identification
58. Block bid

 

Data Field No (54) Subject party

No. Field Identifier Description
54 Subject party The market participant for whom the bid is being submitted (EIC Code).

 

Description of Accepted Values Type Length Examples
EIC Alphanumeric Maximum 16 10X1001A1001A450

 

This field identifies the party that is the Capacity Trader for whom the bids are being submitted. The codification scheme used for the coded identification is indicated by the coding scheme attribute.

This field is mandatory.

 

Data Field No (55) Subject role

No. Field Identifier Description
55 Subject role The role of the subject party

 

Description of Accepted Values Type Length Examples
Refer to ETSO Code list document for the valid list of codes.

A29 = Capacity Trader

Alphanumeric Maximum 3 A29

 

This field identifies the Role of the Subject Party. In this current implementation of ECAN the role shall always be A29, Capacity Trader.

This field is mandatory.

 

Data Field No (56) Divisible

No. Field Identifier Description
56 Divisible An indication whether or not each element of the bid may be partially accepted or not.

 

Description of Accepted Values Type Length Examples
A01 : “Yes”
A02: “No”
Alphanumeric Maximum 3 A01

 

This field indicates whether or not each element of the bid may be marginal. That is to say that the quantity allocated to each element of the bid may be anything between0 and the quantity asked. If it is not divisible the quantity may be only 0 or the quantity asked. This is only applicable for last assessed bid. In the case of capacity auctions if the ATC limit is reached divisible means that it may be reduced to the ATC limit and partly accepted.

This field is mandatory if available.

 

Data Field No (57) Linked bids identification

No. Field Identifier Description
57 Linked bids identification (if applicable) Unique identification associated with all linked bids.

 

Description of Accepted Values Type Length Examples
Unique linked bid identification. Alphanumeric Maximum 35

 

This field identifies a set of bids that are linked together signifying that they are either all accepted or are all rejected. This identification is defined by the bidder and must be unique for a given auction. The linked bid identification is only provided if a bid is associated with the current bid. Both bids must be cross linked to be valid.

This field is mandatory if available.

 

Data Field No (58) Block bid

No. Field Identifier Description
58 Block bid An indication that the values in the period constitute a block bid and that they cannot be changed.

 

Description of Accepted Values Type Length Examples
A01 : “Yes”
A02: “No”
Alphanumeric Maximum 3 A01

 

This field indicates that all the time intervals in the time series are to be considered as a whole and that they cannot be subdivided. The default value for this attribute is A02 = No.

This field is mandatory if available.

RSS_Icon Last update: 09/05/2016  

TRUM – Section 6.9

Examples of transaction reporting

In order to facilitate transaction reporting and the understanding of how to populate the data fields in Table 3 of the Annex to the Implementing Acts, the Agency provides a number of examples of transaction reports. The examples can be found in ANNEX III of this document.

It is worth noting that not all the data fields are mandatory for all transactions. The data fields are expected to be reported only when it is applicable according to this manual. The Agency has prepared an extensive list of trading scenarios to show what is expected and applicable to each scenario. However, the Agency is aware of the fact that, given the characteristics of some transactions, not all the possible trading scenarios have been covered in this manual.

The Agency will continue to work with relevant stakeholders on the reporting of electricity transportation contracts and will provide more detailed information on this topic in subsequent updates of the TRUM, including additional trading scenarios in Annex II.

 

RSS_Icon Last update: 09/05/2016  

RSS_Icon Subscribe to this Category’s RSS